Combined 3-in-1 Machine
Centering Conveyor, Screen Printer, and Outlet Conveyor fully integrated into a single system. Each of the three units has an independent conveyor, interconnected electrical controls, and synchronous leveling orientation of substrate to achieve fully automatic in-line processing.
Automatic Registration Pins
Automatic registration pins on inlet conveyor platform and printing table can perform precise alignment.
Convenient Adjustment
Erected bridge at inlet entrance of conveyor belts system, enable to uplift pneumatically for operator convenience to close machine adjustment and cleaning.
Three Vacuum Zones
Printing table provides air blow and suction, separate three zones switch and automatically switch on / off depending upon printing stroke to assist glass registration.
Special Roller
Unique special roller to carry glass movement without scratching.
Safety Guard
Emergency stop button / safety protective barrier / procedural chain-locking control for thorough protection.
Specification | Metric Units | Unit Conversions |
---|---|---|
Maximum printing area | 1200mm x 2500mm | 47⅝" X 98¾" |
Minimum printing area | 700mm x 1000mm | 28" x 39" |
Max O/D frame size (DxW) | 1750mm x 3200mm | 68⅞" X 125¾" |
Screen frame height | For the convenience of our customers, ATMA prepares all machines sold through RH Solutions to accept roller, diamond chase, and stretch and glue frames with heights 28mm - 52mm (1.1" - 2"). |
|
Screen X/Y adjustment | ±10mm / ±10mm | ± ⅜" / ± ⅜" |
Glass thickness | 3mm to 25mm | 0.118" - 0.98" |
Electrical power source | 3∮, 220/380V, 50/60Hz | 3∮, 220/380V, 50/60Hz |
Compressed air source | 6.3-7.7 kg/cm² | 90 - 110psi |
Note: Rough conversion made from metric scale to United States customary units. Change may be made without prior notice.