Automatic Glass Panel Screen Printer

ATMA ATMATIC GS1216(6) Automatic Glass Panel Screen Printer
Specially designed for screen printing on flat glass, such as automobile windshields, appliances, decorative glass for architecture, and more. Also suitable for printing on other rigid materials.

Combined 3-in-1 Machine

Centering Conveyor, Screen Printer, and Outlet Conveyor fully integrated into a single system. Each of the three units has an independent conveyor, interconnected electrical controls, and synchronous leveling orientation of substrate to achieve fully automatic in-line processing.

Automatic Registration Pins

Automatic registration pins on inlet conveyor platform and printing table can perform precise alignment.

Convenient Adjustment

Erected bridge at inlet entrance of conveyor belts system, enable to uplift pneumatically for operator convenience to close machine adjustment and cleaning.

Three Vacuum Zones

Printing table provides air blow and suction, separate three zones switch and automatically switch on / off depending upon printing stroke to assist glass registration.

Special Roller

Unique special roller to carry glass movement without scratching.

Safety Guard

Emergency stop button / safety protective barrier / procedural chain-locking control for thorough protection.

Specification Metric Units US Standard Units
Table size (DxW cm) 210 x 224 82⅝" x 88¼"
Maximum printing area (mm) 1200 x 1600 47⅝" x 63⅜"
Minimum printing area (mm) 500 x 600 19¾" x 23⅝"
Max O/D frame size (DxW mm) 1700 x 2100 66⅞" x 82⅝"
Min O/D frame size (DxW mm) 1000 x 1200 39 ⅜" x 47 ¼"
Screen frame height For the convenience of our customers, ATMA prepares all machines sold through RH Solutions
to accept roller, diamond chase, and stretch and glue frames with heights 28mm - 52mm (1.1" - 2").
Screen X/Y adjustment (mm) ±10 / ±10 ± ⅜" / ± ⅜"
Vacuum hole size (mm) 5.0 ¼"
Glass thickness 3mm to 19mm 0.118" - 0.748"
Max glass weight 30kg 66 lbs
Screen cleaning level (mm) 400 15 ¾"
Printing head speed 60-920mm/s 2 ⅜" - 36 ¼" per second
Printing head skew angle ±20° ±20°
Peel-off height (mm) 0-50 0-2"
Conveyor belt height (from floor cm) 105 + 3 41 ⅜" + 1 ⅛"
Conveyor belt speed 33-300mm/s 1 ¼" - 11 ¾" per second
Productivity 250 P/H 250 P/H
Electrical power source 3∮, 220/380V, 50/60Hz 3∮, 220/380V, 50/60Hz
Power consumption 6.1kw 6.1kw
Compressed air source 6.3-7.7 kg/cm² 90 - 110psi

Note: Rough conversion made from metric scale to United States customary units. Change may be made without prior notice.

• Table vacuum
• Safety Light-Beam
• Thicker squeegee rubber to enhance effect of Plug-via
• Scratch Residual Ink for automatic cleaning of residue paste/chemical buildup underneath mesh.

• Others available upon request.